IFVW 1B | IFVW 2B | IFVW 3B | FERMAT Face Plate FH65 | D’Andrea Face Plate UT 5-500 S
 |
IFVW 1B
Right Angle Milling Head - manual positioning, manually attached to the headstock, manual tool clamping and unclamping.
| Revolutions: |
10 - 2000 RPM |
| Maximum Power: |
10 kW (13 HP) |
| Maximum Torque (150 RPM) |
180 Nm |
| Tool: |
ISO 40 |
| Turning: |
0°- 360° |
| Coolant through spindle: |
Not possible |
Back to Top |
|
| |
 |
IFVW 2B
Right Angle Mill Head - manual positioning, manually attached to the headstock, manual tool clamping and unclamping.
| Revolutions: |
10 - 1000 RPM |
| Maximum Power: |
55 kW (74 HP) |
| Maximum Torque (150 RPM) |
2,600 Nm |
| Tool: |
ISO 50/60 |
| Turning: |
0°- 360° |
| Coolant through spindle: |
Not Possible |
Back to Top |
 |
IFVW 3B
Two Axis Orthogonal Milling Head - manual positioning, manually attached to the headstock, manual tool clamping and unclamping.
| Revolutions: |
10 - 1000 RPM |
| Maximum Power: |
55 kW (74 HP) |
| Maximum Torque (150 RPM) |
2600 Nm |
| Tool: |
ISO 50/60 |
| Turning: |
0°- 360° |
| Coolant through spindle: |
Not Possible |
Back to Top |
|
| |
 |
FERMAT Face Plate FH 65
| Plate Diameter: |
650 mm (25.59 in) |
| Positioning: |
Automatic |
| Boring Accuracy: |
0,05 mm (0.0002 in) |
| Radial Traverse: |
170 mm (6.69 in) |
| Maximum Boring Diameter: |
1,200 mm (47.24 in) |
| Coolant through spindle: |
Not Possible |
Back to Top |
 |
D’Andrea Face Plate UT 5-500 S
| Plate Diameter: |
500 mm (19.68 in) |
| Positioning: |
Automatic |
| Boring Accuracy: |
0,01 mm (0.0004 in) |
| Radial Traverse: |
160 mm (6.30 in) |
| Maximum Boring Diameter: |
1,000 mm (39.4 in) |
| Coolant through spindle: |
Standard |
Back to Top |
|
