Natco/Carlton
Spindle & Spindle Accessories Catalog
Arm Type Spindle Assemblies (Adjustable Tool Holder Required):
Page 4 - Specifications 0.625 to 1.125 Spindle Nose
Page 5 - Specifications 1.375 to 2.625 Spindle Nose
Page 6 - 0.625 to 1.125 Spindle Nose - Straight Arm Part Numbers
Page 7 - 1.375 to 2.625 Spindle Nose - Straight Arm Part Numbers
Page 8 - 0.625 to 1.125 Spindle Nose - Right Offset Arm Part Numbers
Page 9 - 1.375 to 2.625 Spindle Nose - Right Offset Arm Part Numbers
Page 10 - 0.625 to 1.125 Spindle Nose - Left Offset Arm Part Numbers
Page 11 - 1.375 to 2.625 Spindle Nose - Left Offset Arm Part Numbers
Arm and Adjustable Spindle Type Assemblies (Taper Spindle Nose)
- For Drilling Only:
Page 12 - Specifications 0.500 to 1.125 Spindle Nose
Page 13 - Specifications 1.375 to 2.625 Spindle Nose
Page 14 - 0.500 to 1.125 Spindle Nose - Straight Bearing Part Numbers
Page 15 - 1.375 to 2.625 Spindle Nose - Straight Bearing Part Numbers
Page 16 - 0.500 to 1.125 Spindle Nose - Right Offset Bearing Part Numbers
Page 17 - 1.375 to 2.625 Spindle Nose - Right Offset Bearing Part Numbers
Page 18 - 0.500 to 1.125 Spindle Nose - Left Offset Bearing Part Numbers
Page 19 - 1.375 to 2.625 Spindle Nose - Left Offset Bearing Part Numbers
Arm and Adjustable Spindle Type Assemblies (Taper Spindle Nose)
- For Drilling & Tapping:
Page 20 - Specifications 0.375 to 0.750 Spindle Nose
Page 21 - Specifications 0.875 to 1.625 Spindle Nose
Page 22 - 0.375 to 0.750 Spindle Nose - Straight Bearing Part Numbers
Page 23 - 0.875 to 1.625 Spindle Nose - Straight Bearing Part Numbers
Page 24 - 0.375 to 0.750 Spindle Nose - Right Offset Bearing Part Numbers
Page 25 - 0.875 to 1.625 Spindle Nose - Right Offset Bearing Part Numbers
Page 26 - 0.375 to 0.750 Spindle Nose - Left Offset Bearing Part Numbers
Page 27 - 0.875 to 1.625 Spindle Nose - Left Offset Bearing Part Numbers
Cartridge Type Spindle Assemblies (Adjustable Tool Holder
Required) for Drilling Only - 5-5/8 Slip Plates:
Page 28 - Specifications & Part Numbers 0.625 to 1.125 Spindle Nose
Page 29 - Specifications & Part Numbers 1.375 to 2.625 Spindle Nose
Cartridge Type Spindle Assemblies (Adj. Tool Holder
Required) for Drilling & Tapping - 5-5/8 Slip Plates:
Page 30 - Specifications - 0.437 to 0.750 Spindle Nose
Page 31 - Specifications - 0.875 to 1.625 Spindle Nose
Page 32 - Part Numbers - 0.437 to 0.750 Spindle Nose
Page 33 - Part Numbers - 0.875 to 1.625 Spindle Nose
Cartridge Type Spindle Assemblies (Adjustable Tool Holder
Required) for Drilling Only - 4-1/4 Slip Plates:
Page 34 - Specifications 0.500 to 0.875 Spindle Nose
Page 35 - Part Numbers 0.500 to 0.875 Spindle Nose
Cartridge Type Spindle Assemblies (Adj. Tool Holder
Required) for Drilling & Tapping - 4-1/4 Slip Plates:
Page 36 - Specifications - 0.500 to 0.875 Spindle Nose
Page 37 - Part Numbers - 0.500 to 0.875 Spindle Nose
Page 38 - Adjustable Adaptors - Specifications and Part Numbers
Page 39 - Adjustable Adaptor Assemblies - Part Numbers
Adjustable Extension Adaptors
Page 40 - Adjustable Extension Adaptors - Specifications and Part Numbers
Page 41 - Adjustable Extension Adaptor Assemblies - Part Numbers
Floating Tap Holders
Page 42 - Floating Tap Holders - Specifications
Page 43 - Floating Tap Holders - Part Numbers
Tapered Collets - For Holding Tanged Straight Shank Drills 0.239 to #4 Morse
Page 44 - For Drill Sizes #61 thru 1.65 MM
Page 45 - For Drill Sizes 1.70MM thru 3/32 Inch
Page 46 - For Drill Sizes 2.40 MM thru 3.05 MM
Page 47 - For Drill Sizes 3.10 MM thru #20
Page 48 - For Drill Sizes 4.10 MM thru #8
Page 49 - For Drill Sizes 5.10 MM thru Letter 'C'
Page 50 - For Drill Sizes 6.20 MM thru Letter 'L'
Page 51 - For Drill Sizes 7.40 MM thru Letter 'S'
Page 52 - For Drill Sizes 8.90 MM thru 10.40 MM
Page 53 - For Drill Sizes Letter 'Z' thru 12.40 MM
Page 54 - For Drill Sizes 12.50 MM thru 14040 MM
Page 55 - For Drill Sizes 14.50 thru 16.25 MM
Page 56 - For Drill Sizes 41-64 thru 18.00 MM
Page 57 - For Drill Sizes 18.10 MM thru 20.75 MM
Page 58 - For Drill Sizes 21.00 MM thru 1.00 Inch
Tapered Collets - For Holding Square Shank End Taps
Page 59 - Tap Collets Descriptions & Part Numbers
Universal Joints:
Page 60 - Universal Joints - Specifications and Part Numbers
Upper Drive Assemblies:
Page 61 - Joint & Shaft Assemblies - Specs & Part Numbers - Quick Detachable Type
Page 61 - Joint & Shaft Assemblies - Specifications & Part Numbers - Jarno Type
Page 62 - Upper Drive Assemblies - Pinned Type - Specs & Part Numbers - 1.00 to 1.50
Page 63 - Upper Drive Assemblies - Pinned Type - Specs & Part Numbers - 1.50 to 3.00
Lower Drive Assemblies:
Page 64 - Lower Drive Assemblies - Specifications & Part Numbers - 0.375 to 0.625
Page 65 - Lower Drive Assemblies - Specifications & Part Numbers - 0.625 to 0.750
Page 66 - Lower Drive Assemblies - Specifications & Part Numbers - 0.750 to 1.000
Page 67 - Lower Drive Assemblies - Specifications & Part Numbers - 1.000 to 1.250
Page 68 - Lower Drive Assemblies - Specifications & Part Numbers - 1.250 to 2.000
Page 69 - Lower Drive Assemblies - Specifications & Part Numbers - 2.000 to 3.500
Blank Slip Plates for Cartridge Type Spindle Assemblies:
Page 70 - For Machines B33 thru F4B
Page 71 - For Machines F4B thru D4B HD
'T' Bolts for Spindle Assemblies:
Page 72 - 'T' Bolts, Washers & Nuts - Specifications & Part Numbers
Spindle Sleeves, Wrenches, Spindle Lock Screw:
Page 73 - Spindle Sleeves, Spanner Wrenches, Drill Drifts & Lock Screws
Spindle Extension Sleeves:
Page 74 - Spindle Extension Sleeves
Customer Machine Information:
Page 75 - Useful Machine Information Form
