If you elect to purchase a Re-conditioned NATCO
Multi-Spindle or Carlton Radial Arm drilling machine, you can be
assured that it has been carefully inspected and parts requiring
replacement have been replaced. The Re-conditioning process
involves running the machine in our plant and checking all of the
operations that the machine was built to do. As problems are
detected, the necessary repairs are made to bring the machine
back to an acceptable level of performance. The machine is
thoroughly cleaned, including the oil reservoirs and cylinders.
New oil is then used to properly fill the machine and it is run
to detect leaks. If leaks are found, new seals and gaskets are
installed. The machine is then painted with high quality enamel
to give it a good appearance in your shop. We are confident that
these machines will serve you well for several years with little
repair expense.
RE-CONDITIONED MACHINES ARE BACKED BY OUR (6) MONTH WARRANTY.
This can be a very economical way to purchase a good machine that
will provide many years of service to your company.