Built by FERMAT in the Czech Republic. Sold and supported from Cleveland, Ohio.
With every new FERMAT machine
As an importer of FERMAT boring mills, Lucas completely supports all machines throughout the United States. Our field service technicians are factory trained by FERMAT in the Czech Republic.
| Parameter | Units | inch |
|---|---|---|
| Spindle taper | ISO 50 / BT 50 / CAT 50 — optional BIG Plus, HSK 100A | |
| Spindle speed (max.) | rpm | 5 000/6 000 |
| Max. Power Heidenhain or SIEMENS CNC (S1/S6) | hp | 57.7 / 80.5; 71.1 / 104.5 |
| Max. Torque Heidenhain or SIEMENS CNC (S1/S6) | lbf·ft | 676/940; 1 173/1 724 |
| X-axis Travel of Table | in | 177.2/216.5/255.9/334.6 |
| Y-axis Horizontal Travel of Headstock | in | 141.7/161.4/181.1 |
| Z-axis Vertical Travel of Ram | in | 61 |
| Table plate dimensions | in | 157.5/196.9/236.2/315 x 78.7/98.4/118.1 |
| Table load capacity | lbs | 55 116 |
| Rapid Feed X, Y | in/min | 984, 591 |
| Rapid Feed Z | in/min | 787 |
Imperial values are shown where an exact equivalent exists. Parameters without one — spindle taper, power, torque and speeds — keep their original value.
The FP is FERMAT's bridge-type milling machine with a movable table that is sized to the workpiece rather than the other way round. The milling headstock runs to 5 000 or 6 000 rpm and moves 3 600-4 600 mm horizontally in Y, while the ram strokes up to 1 550 mm in Z. The table itself travels 4 500-8 500 mm in X, carries up to 25 000 kg, and is available in plate sizes from 4 000 x 2 000 mm to 8 000 x 3 000 mm. FERMAT's own UHAmi SDHS and PHAmi S heads, plus other milling heads, mount on the same headstock.
Tell us about your machine and we'll take it from there.