Built by FERMAT in the Czech Republic. Sold and supported from Cleveland, Ohio.
With every new FERMAT machine
As an importer of FERMAT boring mills, Lucas completely supports all machines throughout the United States. Our field service technicians are factory trained by FERMAT in the Czech Republic.
| Parameter | Units | WFC 10/11 | WFC 10 L |
|---|---|---|---|
| Spindle diameter | in | 3.94/4.33 | |
| Spindle taper | — | ISO 50 / BT 50 / CAT 50 | |
| Spindle speed (max.) | rpm | 4000 (opt. 5000) | |
| Main Power Heidenhain or SIEMENS CNC (S1/S6) | hp | 41.6/62.4 | |
| Max. Torque Heidenhain or SIEMENS CNC (S1/S6) | lbf·ft | 1 044/1 567 | |
| Main Power FANUC CNC (S1/S3) | hp | 40.2/49.6 | |
| Max. Torque FANUC CNC (S1/S3) | lbf·ft | 1 010/1 248 | |
| X-axis Cross Travel of Table | in | 49.2/78.7 | |
| Y-axis Vertical Travel of Headstock | in | 49.2/66.9/78.7 | |
| Z-axis Longitudinal Travel of Table | in | 49.2 | 59.1 |
| W-axis Spindle Travel | in | 28.7 | |
| Rapid Feed X, Y, Z | in/min | 472/472/335 | 1 181 |
| Rapid Feed W | in/min | 315 | 472 |
| Rapid Feed B | rpm | 2 (5 optional) | 10 |
| Max. Table Load | lbs | 11 023 | |
| Table Size | in | 39.4×44.1 / 49.2×55.1 / 49.2×70.9 / 55.1×63 / 55.1×70.9 | |
Imperial values are shown where an exact equivalent exists. Parameters without one — spindle taper, power, torque and speeds — keep their original value.
The WFC 10 is a cross-type horizontal boring and milling machine for single-setup work on workpieces up to 5 tonnes, built for shops with limited floor space and suited to serial production. The column stays fixed while the workpiece travels in both axes, so the machine keeps the rigidity of a fully cast-iron structure — CNC rotary table included, driven by two servomotors — in a smaller footprint than a comparable floor-type. Headstock, column, beds, tables and heads are all designed and built by FERMAT in-house, which keeps accuracy repeatable and spares on the shelf.
Angle and facing heads, rotary tables, pallet changers and automatic changing systems compatible with this model. Pick a category to filter.
Angular, universal and facing heads that extend the reach and capability of the spindle.
Pallet changers and clamping systems that keep the machine cutting while the next part is set up.
Automatic head- and pallet-changing systems for unattended, multi-operation running.
Tell us about your machine and we'll take it from there.