WFT 10/11 — Table-Type Horizontal Boring Mill | Lucas Precision Skip to main content
New

WFT 10/11 (L)

  • Table-type layout, 10 000–20 000 kg table — The T10 table is standard at 10 000 kg; the optional longer X axis (3, 4 or 5 m) takes it to 20 000 kg, and a pallet change system keeps the spindle cutting while the next part is set up.
  • Ø 100/110 mm spindle, 730 mm stroke — Two-stage gearbox and three-belt drive up to 4 000 rpm — 5 000 rpm optionally — with a 250 mm support sleeve supplied as standard.
  • Active thermal compensation — Spindle dilation in the Z axis is compensated automatically, using four headstock temperature sensors and an air/oil-cooled gearbox to keep bearing temperature stable.
  • ATC or robot tool change — ATC for 20/30/40 tools exchanging into spindle or head, or a robot changer with up to 96 tools reaching virtually any head position.

Built by FERMAT in the Czech Republic. Sold and supported from Cleveland, Ohio.

With every new FERMAT machine

  • Warranty
  • Delivery
  • Installation
  • Operator training
  • Financing options
  • Field service

As an importer of FERMAT boring mills, Lucas completely supports all machines throughout the United States. Our field service technicians are factory trained by FERMAT in the Czech Republic.

Technical parameters

Parameter Units WFT 10/11WFT 10/11 L
Spindle diameter in 3.94/4.33
Spindle taper — ISO 50 / BT 50 / CAT 50
Spindle speed (max.) rpm 4000 (opt. 5000)
Main Power Heidenhain or SIEMENS CNC (S1/S6-40%) hp 26.1/39.3; 41.6/62.4
Max. Torque Heidenhain or SIEMENS CNC (S1/S6-40%) lbf·ft 701/1 052; 1 044/1 567
Main Power FANUC CNC (S1/S3-60%) hp 29.5/34.9; 40.2/49.6
Max. Torque FANUC CNC (S1/S3-60%) lbf·ft 607/716; 1 010/1 248
X-axis Cross Travel of Table in 78.7/118.1 (T10); optional 78.7/118.1/157.5/196.9 (T20)
Y-axis Vertical Travel of Headstock in 49.2/66.9/78.7
Z-axis Longitudinal Travel of Column in 49.2/66.9 59.1
W-axis Spindle Travel in 28.7
Rapid Feed X, Y, Z in/min 472/472/315 472
Rapid Feed W in/min 315 472
Rapid Feed B rpm 2 (opt. 5)
Max. Table Load lbs 22 046 (opt. 44 092)
Table Size in 47.2×47.2 / 47.2×55.1 / 55.1×63 / 63×63 / 55.1×70.9 / 63×70.9 — optional: 63×70.9 / 70.9×86.6 / 70.9×102.4 / 78.7×94.5 / 98.4×98.4 / 78.7×118.1

Imperial values are shown where an exact equivalent exists. Parameters without one — spindle taper, power, torque and speeds — keep their original value.

Description

The WFT 11 is a table-type horizontal boring and milling machine for parts too heavy to move once clamped, such as long weldments and complex welded frames. The column travels in Z on its own carriage while the rotary table carries the part across it. Table load is 10 000 kg as standard, or 20 000 kg with the optional longer X axis (3, 4 or 5 m); a pallet change system is available to keep the spindle cutting while the next part is set up. Headstock, column, beds and tables are designed and built by FERMAT in-house, keeping accuracy repeatable and spares on the shelf.

Compatible accessories

Angle and facing heads, rotary tables, pallet changers and automatic changing systems compatible with this model. Pick a category to filter.

Angle & facing heads

Angular, universal and facing heads that extend the reach and capability of the spindle.

Automation

Pallet changers and clamping systems that keep the machine cutting while the next part is set up.

Rotary tables

Rotary and tilting tables and floor plates that add axes and carry heavy workpieces.

Automatic changing systems

Automatic head- and pallet-changing systems for unattended, multi-operation running.

automatic-c-axis — FERMAT accessory
Angle & facing heads

Automatic C-axis 0.001°

Manual heads are typically positioned manually, after screws that keep the head in position, are released. This restriction can be removed by adding an adapter - automatically positioned C-axis - between headstock and the milling head. Therefore manual head becomes automatic, where positioning of C-axis is faster and more accurate.

Parameters

ParameterValue
Indexing0,001°
Range of C-axis± 180°
Max. speed8,5/7,3 rpm
Max. torque830/976 Nm
Clamping force of brake3033/3427 Nm
Sensor accuracy±3,8''
Positioningautomatic positioning by servo motor
Clamping to headstockautomatic or manual
Suitabilitythis adapter is suitable for all types of headstocks

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
Cogsdill ZX facing and contouring head
Angle & facing heads

Cogsdill ZX Facing & Contouring Head

Facing and contouring head with a single tool slide that accepts a range of top tooling. External turning, grooving, taper boring, radius forming, chamfering, recessing and threading are all finished in one set-up, without taking the component off the table. Modular slide adapters are available in Capto®, KM® and other tooling systems. Six sizes from ZX 200 to ZX 900.

Parameters

ParameterUnitsZX 200ZX 300ZX 420ZX 500ZX 700ZX 900
Tool slide lengthmm200300420500700900
Body diametermm200300305400500700
Max. radial strokemm38.176.2101.6101.6127.0127.0
Facing head widthmm200300248248250250
Facing head lengthmm307343343343370370
Max. boring diametermmø381ø650ø770ø850ø1120ø1500
Max. boring tool lengthmm210270310310310310
Max. facing diametermmø500ø800ø980ø1060ø1330ø1700
Tool slide adapter widthmm65102102102102102
Max. speedrpm800500350300250150
Stroke ratio2 : 11 : 11 : 11 : 11 : 11 : 1
Feedmm/rev0.4
Max. torquedaNm10080080080010001000
Weightkg107168175205170200
Repeatability accuracymm0.003
Backlashmm±0.025
Boring accuracyH7

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
dandrea-facing-head — FERMAT accessory
Angle & facing heads

D'Andrea UT

D'Andrea UT is a CNC facing head that connects to the machine's U-axis for automatic, program-controlled facing, boring, reaming and threading, interpolating with the other machine axes for concave and convex radiuses. It comes in four sizes — UT 3-360 S, UT 5-500 S, UT 5-630 S and UT 5-800 S — with plate diameters from 360 mm to 800 mm, radial U-axis traverse from 120 mm to 250 mm and boring accuracy to H7.

Parameters

ParameterUnitsUT 3-360 SUT 5-500 SUT 5-630 SUT 5-800 SFHA 65
Plate diametermm360500630800650
Radial traverse U-axismm120160200250200
Max. speedrpm500315250200250
Maximum boring diametermm8001000125014401300
Boring accuracyH7
Approx. weightkg130230350530350
Connection to headstockmanual/automatic
Clamping of toolsmanual / CAPTO C6 / CAPTO C8manual / CAPTO C6 / CAPTO C8manual / CAPTO C6 / CAPTO C8manual / CAPTO C6 / CAPTO C8Manual -
Positioningautomatic
Lubricationmanual by grease
Compatibility spindle Ø / model110-180130-180130-180130-180 (WRF)130-180 (WRF)

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
ohm-20 — FERMAT accessory
Angle & facing heads

OHM Orthogonal Manual Milling Head

OHM 20 is FERMAT's two-axis orthogonal manual milling head, manually attached to the headstock like the UHM 20 and PHM 20 on the same spindle taper (SK 50) and maximum speed (2000 rpm). Where the UHM 20 and PHM 20 index freely at any angle, the OHM 20 positions its two axes in fixed 2.5° steps, with manual tool clamping/unclamping, external coolant as standard and grease lubrication.

Parameters

ParameterValue
Spindle speed10-2000 rpm
Max. Torque1000 Nm
Tool TaperSK 50
Tool Clamping Force20±15% kN
Positioning2.5°/2.5°
External tool coolantstandard
Lubricationmanual by grease

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
phm-20 — FERMAT accessory
Angle & facing heads

PHM Right Angular Milling Head

Manual right-angular milling head. Positioned and clamped by hand; available in two sizes.

Parameters

ParameterUnitsPHM 20PHM 37
Spindle speedrpm10–200010–3000
Max. torqueNm10002000
Tool taperSK 50 (DIN, MAS 45°, ANSI)SK 50 (DIN, MAS 45°, ANSI)
Tool-clamping forcekN20 ±15%
Positioning / indexingany °any°/2,5°
External tool coolantstandard
Coolant through spindle-optional
Lubricationmanual by grease
Tool clampingmanualhydraulic

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
UHM universal milling head
Angle & facing heads

UHM Universal Milling Head

Two-axis universal manual milling head, manually attached to the headstock. Available in two sizes — UHM 20 (manual tool clamping) and UHM 30 (hydraulic tool clamping). Outside coolant standard.

Parameters

ParameterUnitsUHM 20UHM 30
Spindle speedrpm10–200010–3000
Max. torqueNm10001600
Tool taperSK 50 (DIN, MAS 45°, ANSI)SK 50 (DIN, MAS 45°, ANSI)
Tool clampingmanualhydraulic
Tool-clamping forcekN20 ±15%
Positioning / indexingany °any°
Outside coolantstandard
Coolant through spindlenot possibleoptional
Lubricationmanual by grease
Compatibilityall machines, including small headstocks of WFC 10 and WFT 11machines with spindle diameter 130 mm and bigger

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
cross-wise-pallet-changer — FERMAT accessory
Automation

Cross-wise Pallet Changer

Two pallets sit perpendicular to the X axis, each on its own bed, and are exchanged automatically. As with any automatic pallet changer, machining continues on one pallet while the other is cleaned and the next workpiece is clamped. Giving each pallet its own bed keeps the setup station clear of the working area, which suits shops where parts are rigged with cranes and fixtures rather than simply dropped on the table.

Parameters

ParameterValue
Configuration2 pallets perpendicular to the X axis, each on its own bed
Max. load per pallet15 t
Pallet dimensions1 600 × 1 800 / 1 800 × 2 200 / 2 000 × 2 400 / 1 800 × 2 600 mm
ExchangeAutomatic (APC)

Compatible models

WFT 10/11 (L)WFT 13/15 (R,L)
shuttle-pallet-changer — FERMAT accessory
Automation

Shuttle Pallet Changer

Two tables sit on one bed along the X axis and swap places automatically. One part is being cut while the other table is cleared, cleaned and set up with the next workpiece, so the spindle is not waiting on clamping — on repeat work that is where most of the non-cutting time goes. The shuttle layout carries the heaviest loads of the three pallet systems, which makes it the usual choice when the part itself is the reason the machine is standing still.

Parameters

ParameterValue
Configuration2 tables on one bed, along the X axis
Max. load per tableup to 50 t
Table dimensions1 200 × 1 200 mm up to 3 000 × 3 000 mm
ExchangeAutomatic (APC)

Compatible models

WFT 10/11 (L)WFT 13/15 (R,L)
zps-pallet-changer — FERMAT accessory
Automation

ZPS - Zero point clamping system

A pallet clamping system that works from a zero point: modules built into the table take a pin on the pallet, so a fixture or workpiece returns to exactly the same position every time it is put back on the machine. The pin is held by two pistons, clamped by the force of eight springs and released pneumatically — mechanically locked when the machine is cutting, air only to let go. Unlike the shuttle and cross-wise changers, the number of removable pallets is not limited, and the system fits all types of FERMAT machines.

Parameters

ParameterValue
PrinciplePallet clamping at zero point, modules built into the table
ClampingPin held by two pistons, clamped by eight springs
ReleasePneumatic
Number of palletsNot limited
CompatibilityAll types of FERMAT machines

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
rotary-table-t10 — FERMAT accessory
Rotary tables

Rotary Table T10

All the tables have outstanding positioning precision (4 arc sec. 0.010 mm / 1000 mm radius). There is no slip-stick during the positioning of the table. Due to simple design and assembled components, FERMAT tables require minimum maintenance and adjustments during their lifetime. The rotary table consists of bed, slide, and rotary clamping plate. The slide enables the rotary clamping plate to move in the X-axis. The clamping plate is fitted onto a cross roller bearing that secures high load capacity with minimal passive resistance. In order to achieve precision in work pieces, the rotary table is hydraulically clamped at 4 points to avoid rotation during the working process. The table is governed by the control system of the machine, and there is a rotary encoder in the centre of the table that facilitates the automatic positioning in increments of 0.001°. As a standard, the rotary table operates as a continuous 4th axis.

Parameters

ParameterUnitsValue
Clamping plate sizemm1200 x 1200 / 1200 x 1400 / 1400 x 1600 / 1400 x 1800 / 1600 x 1600 / 1600 x 1800
Max. table loadkg10 000
Table travelmm2000 - 3000
T-slots size22H8 / 22H12
Operational travelmm/min1 - 8000
Speed of B-axisrpm2 (opt. 10)
Positioning precision4 arc sec. 0.010 mm / 1000 mm radius
Positioning increment°0.001 (continuous 4th axis as standard)

Compatible models

WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
pickup-2-position — FERMAT accessory
Automatic changing systems

2-position PICK-UP

2 - position PICK-UP is used for automatic exchange of milling heads with automatic clamping on headstock. Suitable for table-type machines WFT 13 and WFT 15. • Automatic Exchange with CNC Control System. • The whole pick-up is movable, to it can reach the headstock. • Typically, one position is for a milling head and the other for a cover plate. • Can be also used for two milling heads (cover plate is made of plastic and is attached to headstock manually). • Fast and accurate exchange that eliminates the danger of damaging the adapter of milling head.

Parameters

ParameterValue
Suitable fortable-type machines WFT 13 and WFT 15
Exchange typeAutomatic Exchange with CNC Control System
Mobilitythe whole pick-up is movable, so it can reach the headstock
Positions usetypically one position for a milling head and the other for a cover plate; can be used for two milling heads (plastic cover plate attached to headstock manually)

Compatible models

WFT 10/11 (L)WFT 13/15 (R,L)
atc-20-32-40-60-90-120 — FERMAT accessory
Automatic changing systems

ATC 20/32/40/60/90/120

ATC – automatic tool changer is one of the possibilities of how to automatically change tools into spindle on FERMAT machines. The ATC can store 20/32/40/60/80/90/120 tools in the magazine. Depending on the version, the ATC can change tool into spindle of headstock (horizontal exchange), or into spindle of automatic milling head in zero position (vertical exchange).

Parameters

ParameterUnitsWFTWRF
Max. number of positions20/32/40/60/90/120
Max. tool weightkg2550
Max. tool diameter – every pocket fullmm125
Max. tool diameter – every other pocket emptymm250
Max. tool lengthmm400

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY
pickup-1-position — FERMAT accessory
Automatic changing systems

Table side PICK UP

PICK-UP is used for automatic exchange of milling heads with automatic clamping on headstock. Suitable for table-type machines for tables 1600x1800 mm and bigger. • The head holder consists of two hinged arms permanently attached to the side of R plate (when arms are folded, there is no risk of holder hitting the column during rotation). • The head is accurately seated in portable frame. • For this solution, as an option, we offer also cover for the milling head, which prevents its possible damage (for example caused by flying chips during machining). • It is semi-automatic exchange of milling head, controlled and inspected by machine operator. • Fast and accurate exchange for reasonable price.

Parameters

ParameterValue
Suitable fortable-type machines for tables 1600 x 1800 mm and bigger
Head holdertwo hinged arms permanently attached to the side of table plate (folded arms: no risk of hitting the column during rotation)
Exchange typesemi-automatic, controlled and inspected by machine operator
Head seatingaccurately seated in a portable frame

Compatible models

WFC 10/11 (L)WFT 10/11 (L)WFT 13/15 (R,L)WF 13/15 R (L)WRF 130/150/160/180/MILLWRF HEAVY

Photos

01 / 08
WFT 10/11 (L)

Request a quote

Tell us about your machine and we'll take it from there.