Retrofit & Remanufacture | Lucas Precision Skip to main content
Services

Retrofit & Remanufacture

Rebuilding, remanufacturing and CNC retrofits for any manufacturer's HBM — plus Natco and Carlton rebuilds, LM-7 relay conversions and replacement pendants.

Lucas machine rebuilding

Lucas Precision's rebuilding programs are specifically designed to return any manufacturer's horizontal boring mill to its original accuracy or even upgrade it to a higher performance level.

  • Complete machine rebuilding — renews machine to original performance and efficiency levels
  • Alignment rebuilding — improves overall machine accuracy
  • Unit rebuilding — restores specific functional units

Remanufacturing

This is a cost-effective alternative to purchasing a new machine. Lucas Precision can actually upgrade older boring mills to today's high-tech standards. Lucas Precision's remanufacturing program includes:

  • Complete inspection of all parts & systems
  • Replacement of high-maintenance gearbox with precision ball screws & servomotors
  • Complete electrical upgrade with state-of-the-art electronics
  • Rebuilding or replacement of all remaining parts to increase precision levels
  • Installation of CNC control retrofit and feedback system

CNC retrofits

Lucas Precision offers advanced CNC retrofit systems specifically developed to increase the productivity and efficiency of existing boring mills.

Interface software is custom-designed by Lucas Precision engineers to optimize your specific machine's performance capability and efficiency. A wide selection of systems from major manufacturers lets you select the perfect upgrade for your particular unit and budget.

  • Expert & professional on-site installation
  • Custom-designed interface software
  • Numerous additional control standard features
  • Accurate and complete documentation
  • Warranty
  • New feedback on all axes

Spindle rebuild for all manufacturers

Our capabilities allow you to utilize “good iron” that may only need some TLC. Lucas has the expertise to accurately restore your spindle and sleeve to meet or exceed our own OEM specifications, and manufactures replaceable spindle taper sockets for any manufacturer's large spindle bar.

Spindles & Drawbars — the 6-point restoration program

Natco and Carlton rebuilds

We not only rebuild Lucas boring mills — we are also the OEM for Natco multi-spindle drills and Carlton radial arm drills. Lucas Precision has been rebuilding Natco and Carlton machine tools for a long time, and only Lucas Precision can perform a true “OEM-quality” rebuild of your Natco or Carlton machine. We alone have the original engineering data and the original electrical, mechanical and structural drawings for your machine.

Carlton radial drill rebuild — scope of work

  • Completely disassemble the drill; only the major castings will be saved
  • Regrind the outer column
  • Replace arm barrel bushings to fit reground column
  • Re-machine and scrape the arm for original OEM tolerances
  • Re-machine the machine base to clean up
  • Install appropriate safety guards
  • Replace all motors and pumps
  • Replace all clamps
  • Replace all shafts, bearings, gears, o-rings and wipers
  • Replace elevating screw and nuts
  • Add upgraded arm lubrication system
  • Install a new spindle and sleeve
  • Replace all electrical components with new cabinet and pendant station
  • The newly remanufactured drill will meet all NEC and NFPA codes
  • Clean and paint
  • Limited warranty

Natco multi-spindle drill rebuild — scope of work

  • Completely disassemble and inspect all parts
  • Rebuild hydraulic cylinder
  • Rebuild complete hydraulic system
  • Rebuild head and neck assemblies
  • Replace all bearings, seals and o-rings
  • Replace electrical cabinet, hardware and wiring to current safety standards
  • Install new PLC control (option) at additional cost
  • Rework all gibs
  • Upgrade lubrication system
  • Replace gears, upper joints where required
  • Cycle test machine with new fixture and tooling if ordered
  • Clean and paint
  • Install new guarding if re-fixtured

Natco retooling and refixturing

With extensive knowledge of your Natco multi-spindle drill, Lucas is prepared to “tool up” your next project. We can do the complete project from design to installation. Allow our staff to design the proper fixturing for your specific parts that will allow you to achieve maximum productivity.

The fixturing can feature any or all of the following

  • Rotary tables
  • Part set-up and clamping
  • Multiple parts or multiple operations
  • Proper joint and shaft selection
  • Upper joints and lower joints, shafts, universals
  • Design and build of slip plates and drill plates
  • Adjustable arms

Manual machine upgrades

LM-7 relay conversion packages

The LM-7 electrical relay conversion package was originally developed to allow the removal of obsolete numerical control systems on machines that are not good candidates for CNC retrofit. This package allows the machine to operate in the same manner as the “power shift” manual machines of the same period of construction. In later years, we expanded the product line to allow for the replacement and elimination of worn-out and malfunctioning relays on Lucas models that were already manual machines. The proprietary software can greatly extend your machine's service life while reducing downtime.

Don't risk downtime or damage to your customer's parts or — most importantly — the safety of your machinist when you can quickly and efficiently get your control up to date with modern pre-assembled electrical components.

  • Replaces 30–50 obsolete or worn relays
  • Replaces all makes of electrical relays
  • Diagnostic LEDs speed troubleshooting
  • Custom-designed software for your specific machine
  • In stock for immediate shipment

After an LM-7 conversion, most of the control system of an obsolete numerical control or manual relay panel from the early 1960s is replaced with modern solid-state technology that is far less prone to wear and should, therefore, result in much less downtime. In addition, each LM-7 is equipped with “trouble-shooting” lights to assist with problem diagnosis and fused outputs to prevent damage to the LM-7 in the event of “shorts” on the machine tool. The LM-7 conversion package is often installed simultaneously with a replacement pendant.

Replacement pendants for Lucas 41B, 42B and other models

Due to the complete unavailability of the old-style “turn/tilt” switches used extensively in Lucas 41B, 42B and other models, and for which there are no commercial substitutes, Lucas Precision has engineered a complete replacement operator pendant with a 30-foot pre-attached cable that completely removes the need for these obsolete switches.

The pre-attached cable allows ease of installation and simple connection to your relay panel, resulting in greatly lowered costs of maintenance as well as increased “uptime” for your machine. If your machine requires more than a 30-foot cable, please let us know at time of order. New pendants are often installed simultaneously with a relay conversion package.

Lucas replacement operator pendants are equipped with the same “pull-on, slap-off” operation of the earlier pendant designs so that — in hurried or panic situations — your operator will be able to rapidly stop the machine with the same “time-tested” motions to which he has been accustomed. In addition, since the new pendants use modern, commercial switches as much as possible, replacement of individual switches is more rapid and less costly than the replacement of the old “turn-tilt” switches.

We have several different designs available to replace the older types of pendants. Obsolete pendants that can be replaced:

  • 41B “2-Station” pendant — later design
  • 41B “2-Station” pendant — original design
  • 42B “Slim-Style” pendant — replaced by a “3-Station” or “4-Station with Range Switch” pendant

Machine attachment rebuild

Spindle head

  • Replace all worn parts as necessary
  • Gears, shafts, clutches
  • Replace all bearings and seals
  • Rebuild the spindle and sleeve
  • Rebuild tool ejection system
  • Rebuild motor

Pillow blocks, gear boxes and transmissions are rebuilt as well.

Rotary tables

  • Restore to OEM tolerance
  • Hand scraping
  • Install digital readout on rotary axis
  • Additional fixed shot pin positions to your specific degree requirements

Combination boring and facing heads, precision feed-out (contouring) heads

  • Restore to OEM tolerance
  • Hand scraping
  • Replace all necessary components

European machine rebuilding

Pressl, member of FERMAT Group

Rebuilding, retrofitting and servicing of European machine tools. Specializing in modernization and general repair of horizontal boring machines, lathes and carousels. Upgrading of machine specifications including spindle speed increases up to 2,500 rpm, high-pressure cooling, telescopic covers of the X and Y axis, safety cab, etc.

  • Installation of Siemens, Heidenhain, Fanuc, Mefi, etc. CNC systems
  • Accessories such as rotary table, milling heads, chip conveyor, ATC, etc.
  • Dismantling and assembly
  • Service and spare parts
  • Pressl guarantee: 24 months
Contact
Pressl s.r.o.
Madlonova 21, 337 01 Rokycany, Czech Republic
Phone: +420 371 740 611
Fax: +420 371 740 612
info@pressl.cz www.pressl.cz (external site)

Request service or support

Tell us about your machine and what you need — our service team will get back to you.

Thank you — we have your request

Up to 5 files, 10 MB each (PDF, JPG, JPEG, PNG, WEBP, STEP, STP, DXF, DWG, ZIP).

Goes to our team in Cleveland, Ohio.