Built by FERMAT in the Czech Republic. Sold and supported from Cleveland, Ohio.
With every new FERMAT machine
As an importer of FERMAT boring mills, Lucas completely supports all machines throughout the United States. Our field service technicians are factory trained by FERMAT in the Czech Republic.
| Parameter | Units | WRF 130 | WRF 150 | WRF 160/180 | WRF MILL |
|---|---|---|---|---|---|
| Spindle diameter | in | 5.12 | 5.91 | 6.30/7.09 | — |
| Spindle taper | — | ISO 50 / BT 50 / CAT 50 — optional BIG Plus, HSK 100A | |||
| Spindle speed (max.) | rpm | 3400 (opt. 4000) | 2800 (opt. 3500) | 2500 (opt. 3200) / 2500 | 5000 |
| Max. Power Heidenhain or SIEMENS CNC (S1/S6) | hp | 55 / 82.5; 71.1 / 104.5 | 77.8 / 115.3; 99.2 / 146.2 | 77.8 / 115.3; 99.2 / 146.2 | 57.7 / 80.5; 71.1 / 104.5 |
| Max. Torque Heidenhain or SIEMENS CNC (S1/S6) | lbf·ft | 1 548 / 2 323; 2 001 / 2 942 | 2 420 / 3 679; 2 470 / 3 631 | 2 420 / 3 679; 2 470 / 3 631 | 676 / 940; 1 173 / 1 724 |
| Main Power FANUC CNC (S1/S3) | hp | 49.6 / 60.3; 71.1 / 104.5 | 80.5 / 100.6 | 80.5 / 100.6 | — |
| Main Torque FANUC CNC (S1/S3) | lbf·ft | 1 742 / 2 119; 2 001 / 2 942 | 2 087 / 2 608 | 2 087 / 2 608 | — |
| X-axis Cross-travel of Column | in | 157.5 - 1 082.7 | 157.5 - 1 082.7 | 157.5 - 1 082.7 | 157.5 - 1 106.3 |
| Y-axis Vertical Travel of Headstock | in | 98.4 / 118.1 / 137.8 / 157.5 / 177.2 / 196.9 / 216.5 / 236.2 | 98.4 / 118.1 / 137.8 / 157.5 / 177.2 / 196.9 / 216.5 / 236.2 | 98.4 / 118.1 / 137.8 / 157.5 / 177.2 / 196.9 / 216.5 / 236.2 | 98.4 - 236.2 |
| Z-axis Longitudinal Travel of Ram | in | 47.2 | 47.2 (opt. 59.1) | 47.2 (opt. 59.1) | 61 (opt. 78.7) |
| W-axis Spindle Travel | in | 31.5 | 39.4 | 39.4 | — |
| Rapid Feed X, Y | in/min | 787, 591 | |||
| Rapid Feed Z, W | in/min | 394 | 394 | 394 | 787 (Z) |
| Max. table load — rotary table (optional accessory) | lbs | T20 - 44 092 / T25 - 55 116 / T50 - 110 231 / T60 - 132 277 / T80 - 176 370 / T100 - 220 462 | |||
Imperial values are shown where an exact equivalent exists. Parameters without one — spindle taper, power, torque and speeds — keep their original value.
The WRF 130/150/160/180 is FERMAT's large floor-type horizontal boring mill series for very large, heavy workpieces, offered with a boring headstock (130, 150, 160 or 180 mm spindle, 800-1000 mm spindle travel, optional tilting) or a milling headstock (5 000 rpm, no boring spindle) for fast milling and drilling of medium and large parts. The column is a massively constructed, annealed weldment; the boring headstock is cast iron GGG60 with a digitally-controlled servomotor regulating spindle rpm. Workpieces sit on floor plates or rotary tables rated to 100 t.
Angle and facing heads, rotary tables, pallet changers and automatic changing systems compatible with this model. Pick a category to filter.
Angular, universal and facing heads that extend the reach and capability of the spindle.
Pallet changers and clamping systems that keep the machine cutting while the next part is set up.
Rotary and tilting tables and floor plates that add axes and carry heavy workpieces.
Automatic head- and pallet-changing systems for unattended, multi-operation running.
Tell us about your machine and we'll take it from there.