Built by FERMAT in the Czech Republic. Sold and supported from Cleveland, Ohio.
With every new FERMAT machine
As an importer of FERMAT boring mills, Lucas completely supports all machines throughout the United States. Our field service technicians are factory trained by FERMAT in the Czech Republic.
| Parameter | Units | inch |
|---|---|---|
| Spindle diameter | in | 5.91 / 6.30 |
| Spindle taper | ISO 50 / BT 50 / CAT 50 — optional BIG Plus, HSK 100A | |
| Spindle speed (max.) | rpm | 2800 (opt. 3500) / 2500 (opt. 3200) |
| Max. Power Heidenhain or SIEMENS CNC (S1/S6) | hp | 99.2 / 122 |
| Max. Torque Heidenhain or SIEMENS CNC (S1/S6) | lbf·ft | 2 470 / 3 039 |
| X-axis Cross-travel of Column | in | 157.5 - 1 106.3 |
| Y-axis Vertical Travel of Headstock | in | 157.5 - 393.7 |
| Z-axis Longitudinal Travel of Ram | in | 63 |
| W-axis Spindle Travel | in | 39.4 |
| Rapid Feed X, Y | in/min | 787, 591 |
| Rapid Feed Z, W | in/min | 591, 394 |
| Max. table load — rotary table (optional accessory) | lbs | T20 - 44 092 / T25 - 55 116 / T50 - 110 231 / T60 - 132 277 / T80 - 176 370 / T100 - 220 462 |
Imperial values are shown where an exact equivalent exists. Parameters without one — spindle taper, power, torque and speeds — keep their original value.
The WRF Heavy is FERMAT's largest floor-type horizontal boring mill, built for oversized workpieces that need a wider, taller working envelope than the standard WRF series. Its headstock sits between two columns rather than one, with four servomotors and four rack-and-pinion drives moving it along a 4 000-10 000 mm Y-axis travel. The 150 mm or 160 mm spindle extends 1 000 mm in W, and the ram strokes 1 600 mm in Z. Workpieces are set on floor plates or a rotary table rated to 100 t.
Angle and facing heads, rotary tables, pallet changers and automatic changing systems compatible with this model. Pick a category to filter.
Angular, universal and facing heads that extend the reach and capability of the spindle.
Pallet changers and clamping systems that keep the machine cutting while the next part is set up.
Rotary and tilting tables and floor plates that add axes and carry heavy workpieces.
Automatic head- and pallet-changing systems for unattended, multi-operation running.
Tell us about your machine and we'll take it from there.